# These are some commands that can be called from the command line on
# the device that are helpful for testing.  Sorry that there is no
# description.

Set goose in mask
cmd_dspeng 0x0d000e 1 0xfffe 0x80000405
Read goose in data
cmd_dspeng 0x0d0002 0xffff 0x80000305

Set read pointer (doesn't need an inverted check word)
cmd_dspeng 0x090000 0xf0d500 0x80000305

Read a single word
cmd_dspeng 0x0a0002 0x80000205

cmd_dspeng 0x090000 0xf0d500 0x80000305 ; cmd_dspeng 0x0a0002 0x80000205 ; cmd_dspeng 0x0a0002 0x80000205 ; cmd_dspeng 0x0a0002 0x80000205 ; cmd_dspeng 0x0a0002 0x80000205 ; cmd_dspeng 0x0a0002 0x80000205


To trigger Goose OUT's without having to use the engine or TU.

cmd_dspeng 0x70000 0xf2bff 0xf0d400 0x80000405
cmd_dspeng 0x80002 1 1 1 4 5 6 7 8 0x80000A05
cmd_dspeng 0x70000 0xfb9ff 0xf04600 0x80000405
cmd_dspeng 0x80002 0 0x80000305

cmd_dspeng 0x70000 0xf2bff 0xf0d400 0x80000405
cmd_dspeng 0x80002 9 2 2 7 5 6 7 8 0x80000A05
cmd_dspeng 0x70000 0xfb9ff 0xf04600 0x80000405
cmd_dspeng 0x80002 0 0x80000305

